WPAC-M07K
View review on ComfyКомнату в 15-20 кв м охлаждает отлично
Portable air conditioner WetAir WPAC-M07K
WetAir Model: WPAC-M07K
Out Of Stock
Be the first to review this model
1 / 14
Product photo
11,999 UAH
Ask about availability
Leave your email and we will send the manager an enquiry about this model. This is not an automated mailing list.
Key specifications
- Cooling capacity
- 7000 BTU/h (2.05 kW)
- Dimensions
- 30 × 30 × 70 cm
- Modes
- cooling
- Coverage
- up to 25 m²
Model data
Verified specifications
- Cooling capacity
- 7000 BTU/h (2.05 kW)
- Dimensions
- 30 × 30 × 70 cm
- Modes
- cooling
- Coverage
- up to 25 m²
- Refrigerant
- R290
- Energy efficiency class
- A
- Sound power level
- ≤ 65 dB(A)
- Self-evaporating condensate
- yes
In detail
Product description
WetAir · WPAC-M07K
7,000 BTU/h cooling in a narrow body
WetAir WPAC-M07K provides cooling at 7,000 BTU/h, or 2.05 kW. Its 30 × 30 × 70 cm body and two fan speeds suit a window-side position, with suggested room coverage up to 25 m².
- Cooling capacity
- 7,000 BTU/h · 2.05 kW
- Suggested room size
- up to 25 m²
- Performance depends on room conditions.
- Overall dimensions
- 30 × 30 × 70 cm
- Speeds
- 2
How it works
How heat leaves the room
WPAC-M07K has a 2.05 kW cooling rating; its two fan speeds adjust airflow intensity.
Room air gives up heat
WPAC-M07K has a 2.05 kW cooling rating; its two fan speeds adjust airflow intensity. Room air passes over a cold heat exchanger to release that heat.
Refrigerant carries the heat
Refrigerant carries heat to the hot heat exchanger, with a compressor driving the refrigeration cycle.
Hot air is exhausted outdoors
Air passing over the hot heat exchanger carries heat out through the exhaust duct, not back into the room.
Cooled air returns
A separate cooled airflow returns to the room. Sealing the window helps limit warm air entering from outside.
The resultCooling needs a correctly installed exhaust; without it, the hot air stays in the room.
For cooling, the exhaust hose must discharge hot air outdoors through a properly fitted window kit. Running without heat exhaust will not cool the room. Interior images are not installation diagrams.
A cooling-only model
WPAC-M07K has no heating mode. Choose it for summer cooling, and compare its 2.05 kW rating with cooling output, not the electrical input of other models.
A small body still needs an exhaust
The 30 × 30 × 70 cm dimensions do not include space for the exhaust duct. Condensate self-evaporation reduces the need for draining, but does not eliminate it in every condition.
Getting started
Prepare the window and exhaust
Position the unit level, route the duct outdoors and seal the opening as instructed. Avoid sharp bends and keep the grilles clear.
Select cooling
Set the desired temperature and check the cooled airflow direction. Sunlight, warm surfaces and incoming outdoor air affect how quickly the room cools.
Check condensate
Watch the indicators and drain water when required by the manual. Switch off before draining or moving the unit.
Your questions answered
Does the WPAC-M07K have heating?
No. It is a cooling-only model. Heating requires a model explicitly equipped with that mode.
Can it cool without the exhaust duct?
Room cooling requires heat to leave the room. Without a correctly installed exhaust duct, hot air returns to the room.
PDF
Model manual · WPAC-M07K
Support
Manual and service
Model documentation and WetAir support.
WetAir.ua
Customer reviews
Retailer reviews
What customers say about this model
Short positive excerpts about this exact model with direct links to public sources.
WPAC-M07K
Retail partners
Where to find WetAir
These links open general WetAir retailer pages and do not confirm stock for this model.
