WetAir · Mobile cooling · WPAC-M09K
More M-series capacity for a larger room
WPAC-M09K is designed for a room up to 30 m² and offers focused cooling where a fixed split system is not planned. For effective cooling, the warm-air duct must lead outside.
The WPAC-M09K retains the familiar M-series body, while raising the room-size guide to 30 m² and power to 1005 W at a weight of 21 kg.
Your space
Up to 30 m² in a familiar mobile format
The M09K suits rooms larger than a typical bedroom while retaining a relatively manageable build. The weight of 21.0 kg means that the castors make room-to-room moves easier, but the position by the window and the warm-air duct route are best planned in advance.
- living room up to 30 m²
- a room with a sunny window
- access to a window or other permitted exit
How it works
Larger rooms still need heat vented outside
The WPAC-M09K draws in warm room air and returns a cooled airflow, while a flexible duct carries excess heat outside. If you leave the duct in the room, the cooling benefit is lost.
Settings
Keep the room sealed against returning heat
First, install the WPAC-M09K vertically, connect the warm-air duct without sharp bends, and only then select the mode. After transport, leave the appliance upright for the period stated in the manual.
- align the appliance
- route and seal the duct outside
- seal the window exit and close the door
What sets this model apart
1005 W and up to 30 m² with a weight of 21 kg
The M09K extends the suggested room size beyond the M07K with a slight difference in mass. For the WPAC-M09K, the confirmed input power is 1005 W; this is an appliance specification, not a promise of identical results in rooms with different sun exposure or insulation.
Care and placement
Keep the airflow clear on hot days
The intake filter on the WPAC-M09K needs regular cleaning, while the duct needs a clear, kink-free route. Before draining condensate or carrying out maintenance, switch off the appliance and follow the sequence in the manual.
- clean the inlet filter
- do not pinch the air duct
- check condensate drainage
Check the fit
21 kg balances room coverage and mobility
The body needs a place near the window, access to the filter and a smooth curve of the duct. The net weight is 21.0 kg. Check the dimensions diagram on the product page and add space for the cable, duct and filter access.
| Suggested room size | up to 30 m² |
|---|---|
| Power | 1005 W |
| Net weight | 21 kg |
Next step
Match the M09K to the room you actually have
Before using the WPAC-M09K, check both the appliance position and the complete warm-air route to the window. In the manual, check the supplied parts, permissible length and position of the duct, the condensate procedure, and the restart conditions.
