WetAir · Mobile cooling · WPAC-E07K
Focused cooling for a more compact room
WPAC-E07K is designed for a room up to 25 m² and offers focused cooling where a fixed split system is not planned. For effective cooling, the warm-air duct must lead outside.
The WPAC-E07K is a lighter 20 kg option for rooms up to 25 m² when seasonal cooling is required next to the window.
Your space
Up to 25 m² and closer to the window
This is a basic format for a bedroom, office or rented accommodation with a planned window outlet. The weight of 20.0 kg means that the castors make room-to-room moves easier, but the position by the window and the warm-air duct route are best planned in advance.
- bedroom or office
- cooling without a fixed split system
- access to a window or other permitted exit
How it works
The heat must leave the room
The WPAC-E07K draws in warm room air and returns a cooled airflow, while a flexible duct carries excess heat outside. If you leave the duct in the room, the cooling benefit is lost.
Settings
Route the duct first, then start cooling
First, install the WPAC-E07K vertically, connect the warm-air duct without sharp bends, and only then select the mode. After transport, leave the appliance upright for the period stated in the manual.
- align the appliance
- route and seal the duct outside
- start cooling once the duct is checked
What sets this model apart
780 W for rooms up to 25 m²
The E07K combines a lower weight with a clear suggested room size. For the WPAC-E07K, the confirmed input power is 780 W; this is an appliance specification, not a promise of identical results in rooms with different sun exposure or insulation.
Care and placement
A clean filter and an unobstructed duct
The intake filter on the WPAC-E07K needs regular cleaning, while the duct needs a clear, kink-free route. Before draining condensate or carrying out maintenance, switch off the appliance and follow the sequence in the manual.
- clean the inlet filter
- do not pinch the air duct
- check condensate drainage
Check the fit
20 kg on castors: mobile, but not hand-held
Check the place near the window and the turning radius in advance. The net weight is 20.0 kg. Check the dimensions diagram on the product page and add space for the cable, duct and filter access.
| Suggested room size | up to 25 m² |
|---|---|
| Power | 780 W |
| Net weight | 20 kg |
Next step
Map the route to the window first
Before using the WPAC-E07K, check both the appliance position and the complete warm-air route to the window. In the manual, check the supplied parts, permissible length and position of the duct, the condensate procedure, and the restart conditions.
