WetAir · Mobile cooling · WPAC-H12KB
Cooling up to 35 m² in a graphite body
WPAC-H12KB is designed for a room up to 35 m² and offers focused cooling where a fixed split system is not planned. For effective cooling, the warm-air duct must lead outside.
The black WPAC-H12KB covers the largest suggested room size in the group — up to 35 m² — and adds a confirmed heating mode to its 1300 W mobile format.
Your space
For a larger room and an expressive interior
The H12KB fits into a more spacious living room, where the black body can remain part of the decor. The weight of 26.0 kg means that the castors make room-to-room moves easier, but the position by the window and the warm-air duct route are best planned in advance.
- room up to 35 m²
- cooling and confirmed heating
- access to a window or other permitted exit
How it works
Higher capacity still needs a window outlet
The WPAC-H12KB draws in warm room air and returns a cooled airflow, while a flexible duct carries excess heat outside. If you leave the duct in the room, the cooling benefit is lost.
Settings
One appliance — two seasonal modes
First, install the WPAC-H12KB vertically, connect the warm-air duct without sharp bends, and only then select the mode. After transport, leave the appliance upright for the period stated in the manual. The official product page also confirms a heating mode for this model.
- align the appliance
- route and seal the duct outside
- choose cooling or heating according to the instructions
What sets this model apart
The largest room-size guide, plus heating mode
It is the combination of up to 35 m², 1300 W and heating mode that distinguishes the H12KB. For the WPAC-H12KB, the confirmed input power is 1300 W; this is an appliance specification, not a promise of identical results in rooms with different sun exposure or insulation.
Care and placement
Two seasons, one simple care routine
The intake filter on the WPAC-H12KB needs regular cleaning, while the duct needs a clear, kink-free route. Before draining condensate or carrying out maintenance, switch off the appliance and follow the sequence in the manual.
- clean the inlet filter
- do not pinch the air duct
- check condensate drainage
Check the fit
26 kg: plan first, then move
This is the heaviest model in the group, so prepare a flat route and duct space. The net weight is 26.0 kg. Check the dimensions diagram on the product page and add space for the cable, duct and filter access.
| Suggested room size | up to 35 m² |
|---|---|
| Power | 1300 W |
| Net weight | 26 kg |
| Heating mode | Yes |
Next step
Plan for summer and the shoulder seasons
Before using the WPAC-H12KB, check both the appliance position and the complete warm-air route to the window. In the manual, check the supplied parts, permissible length and position of the duct, the condensate procedure, and the restart conditions.
