Air purifier WetAir WAP-35
WAP-35
- Coverage
- up to 35 m²
- Speeds
- 4 speeds + AUTO
- Timer
- 1–12 h
WetAir air purifiers trap dust, pollen, pet hair and odours with a combined filter: a coarse layer, activated carbon and HEPA. The models cover rooms from 25 to 80 m², so start with the floor area, then compare modes, noise and the cost of the replacement filter.
Compare available models by price, availability, and the control method that suits you.
WAP-35
WAP-40
WAP-50
WAP-25
The coverage figure must be at least your room's area: WAP-35 is rated for 35 m², WAP-40 for 40 m², WAP-50 for 80 m². Open doors and a high ceiling add air volume, so choose a model with headroom.
WAP-35 (30 W) is a compact model for rooms up to 35 m², WAP-40 for 40 m². WAP-50 (80 W) with a class H13 HEPA filter, PM2.5 sensor and smartphone control is rated for spaces up to 80 m². Check the product card for the availability of the compact WAP-25 for 25 m² with a 2/4/8-hour timer.
Keep the purifier running regularly rather than for an hour: steady circulation gives a stable result. Place the unit with clear space around it, away from heat sources. The filter indicator reminds you to replace it; reset the counter as the manual describes after fitting a new filter. Clean the coarse pre-filter regularly; the combined filter is replaced as a whole.
Yes, the activated-carbon layer handles odours. HEPA traps particles, not gases.
Follow the replacement indicator and the model's manual; in very dusty rooms the interval shortens.
Yes, the units are designed for long running; at night use the night mode or the lowest speed.
Read more: choosing an air purifier by room size and filter. Replacement filters and accessories are listed in a separate section.