WetAir · Mobile cooling · WPAC-M07K
Compact M‑series for one room
WPAC-M07K is designed for a room up to 25 m² and offers focused cooling where a fixed split system is not planned. For effective cooling, the warm-air duct must lead outside.
The WPAC-M07K is a more compact entry point in the M-series: up to 25 m², 780 W and 20.5 kg for a room with a planned window outlet.
Your space
Up to 25 m², without unnecessary capacity
The M07K is suitable when you need to cool a specific bedroom or study, rather than a large open space. The weight of 20.5 kg means that the castors make room-to-room moves easier, but the position by the window and the warm-air duct route are best planned in advance.
- bedroom up to 25 m²
- a separate home office
- access to a window or other permitted exit
How it works
Mobility starts with a well-planned duct
The WPAC-M07K draws in warm room air and returns a cooled airflow, while a flexible duct carries excess heat outside. If you leave the duct in the room, the cooling benefit is lost.
Settings
Connect the duct without sharp bends
First, install the WPAC-M07K vertically, connect the warm-air duct without sharp bends, and only then select the mode. After transport, leave the appliance upright for the period stated in the manual.
- align the appliance
- route and seal the duct outside
- check the tightness of the window insert
What sets this model apart
780 W in a compact body
M07K pairs the more compact suggested room size with a weight of 20.5 kg. For the WPAC-M07K, the confirmed input power is 780 W; this is an appliance specification, not a promise of identical results in rooms with different sun exposure or insulation.
Care and placement
Filter, duct and condensate — three regular checks
The intake filter on the WPAC-M07K needs regular cleaning, while the duct needs a clear, kink-free route. Before draining condensate or carrying out maintenance, switch off the appliance and follow the sequence in the manual.
- clean the inlet filter
- do not pinch the air duct
- check condensate drainage
Check the fit
20.5 kg for seasonal movement
Plan for a location with access to the rear, rather than pressing the body against the wall. The net weight is 20.5 kg. Check the dimensions diagram on the product page and add space for the cable, duct and filter access.
| Suggested room size | up to 25 m² |
|---|---|
| Power | 780 W |
| Net weight | 20.5 kg |
Next step
Plan the M07K around the intended window
Before using the WPAC-M07K, check both the appliance position and the complete warm-air route to the window. In the manual, check the supplied parts, permissible length and position of the duct, the condensate procedure, and the restart conditions.
WPAC-M07K
