WetAir recipes
Teriyaki beef jerky
Teriyaki beef jerky: distinctive flavour with a dry, resilient texture.
Soy sauce, ginger and honey form the marinade; after marinating, drain the excess and blot the strips thoroughly.
Start with a small batch of “Teriyaki beef jerky”: it is easier to space the strips well and learn the right texture without rushing.
| Temperature | Thermometer-verified heat step: 72 °C / 162 °F; Dehydrator stage: 65 °C / 149 °F |
|---|---|
| Drying time | At least 4 hours |
| Ready when | A briefly cooled sample should bend and crack without breaking, with no damp or under-dried spots inside. Colour and elapsed drying time do not prove completion. |
| Compatible models | WetAir WFD-K1000S, WetAir WFD-K700BSS |
Ingredients
- lean beef 850 g
- soy sauce 55 ml
- ginger 10 g
- honey 18 g
Method
-
Prepare
Trim visible fat and cut partially frozen meat into even strips no more than 6 mm thick.
-
Dissolve the honey in the soy sauce and ginger until evenly combined.
-
Coat the strips with the marinade, cover and refrigerate for 6–12 hours at no more than 4 °C.
-
After marinating, drain excess liquid and blot the strips thoroughly. Keep raw meat, utensils and juices separate from ready-to-eat food; clean the work area thoroughly before reusing it.
-
Preheat the dehydrator for 15–30 minutes to an actual 65 °C; verify the air at tray level with a separate thermometer. Only then begin heating the food in the oven.
-
Preheat the oven to 163 °C. Arrange the strips without overlap and heat them; use a thin calibrated probe to check several of the thickest strips: each centre must reach at least 72 °C. Oven temperature is not food temperature.
-
Arrange and dry
Immediately use clean tongs to move the hot strips into the preheated dehydrator and arrange them in one layer without overlap.
Leave space between pieces so air can move freely around them. -
Dry for at least 4 hours at an actual 65 °C, then continue until done: a briefly cooled strip bends and cracks without breaking and has no damp spots.
-
Check and cool
Move the finished strips to a clean rack and let them cool completely before packing.
Check the texture on a separate piece after it cools briefly. -
Pack the cooled strips loosely in a closed container and keep refrigerated for 2–4 days, shaking daily. Refrigerated conditioning is a conservative editorial choice: PNW 632 specifies the period but not a temperature for this stage. If moisture appears, re-dry the entire batch and repeat the check; then pack airtight and refrigerate or freeze.
After cooling
After conditioning, pack airtight and refrigerate or freeze; room-temperature storage is not part of this method.
How to enjoy it
Slice the finished ribbons and serve them over rice with vegetables.
Sources and evidence
Compatible WetAir models
Sources
- USDA FSIS guidance on heating meat before dehydration
- Penn State Extension guidance on strips, drying, doneness and storage
- NCHFP guidance on preparing, drying and packaging jerky
- WetAir manual for the large steel dehydrator
- WetAir manual for the meat and poultry dehydrator
- Pacific Northwest Extension — making jerky safely at home
Frequently asked questions
What should I check before serving “Teriyaki beef jerky”?
The pack should be free from condensation and the smell and surface should show no sign of spoilage; do not taste a doubtful batch.