Portable air conditioner WetAir WPAC-H10K
WPAC-H10K
- Cooling capacity
- 10000 BTU/h (2.93 kW)
- Dimensions
- 35 × 34.8 × 70.1 cm
- Net weight
- 24.5 kg
Portable air conditioner WetAir WPAC-E07K
WetAir Model: WPAC-E07K
Out Of Stock
Be the first to review this model
1 / 6
Product photo
11,499 UAH
Ask about availability
Leave your email and we will send the manager an enquiry about this model. This is not an automated mailing list.
Key specifications
- Power
- 780 W
- Dimensions
- 30.3 × 28.9 × 67.3 cm
- Net weight
- 20 kg
- Coverage
- up to 25 m²
Model data
Verified specifications
- Power
- 780 W
- Dimensions
- 30.3 × 28.9 × 67.3 cm
- Net weight
- 20 kg
- Coverage
- up to 25 m²
- Refrigerant
- R290
- Energy efficiency class
- A
- Noise level
- ≤ 53 dB(A)
- Sound power level
- ≤ 65 dB(A)
- LED display
- yes
- Remote control
- yes
Dimensions
Model dimensions
In detail
Product description
WetAir · WPAC-E07K
Portable cooling with remote control and an LED display
WetAir WPAC-E07K is a portable air conditioner with suggested coverage up to 25 m². Its 30.3 × 28.9 × 67.3 cm body houses the cooling system, while a window exhaust duct carries heat outside.
- Suggested room size
- up to 25 m²
- Performance depends on room conditions.
- Power input
- 780 W
- Electrical input, not cooling capacity.
- Overall dimensions
- 30.3 × 28.9 × 67.3 cm
- Refrigerant
- R290
How it works
How heat leaves the room
WPAC-E07K cools the room air by carrying its heat outside through an exhaust duct.
Room air gives up heat
WPAC-E07K cools the room air by carrying its heat outside through an exhaust duct. Room air passes over a cold heat exchanger to release that heat.
Refrigerant carries the heat
Refrigerant carries heat to the hot heat exchanger, with a compressor driving the refrigeration cycle.
Hot air is exhausted outdoors
Air passing over the hot heat exchanger carries heat out through the exhaust duct, not back into the room.
Cooled air returns
A separate cooled airflow returns to the room. Sealing the window helps limit warm air entering from outside.
The resultCooling needs a correctly installed exhaust; without it, the hot air stays in the room.
For cooling, the exhaust hose must discharge hot air outdoors through a properly fitted window kit. Running without heat exhaust will not cool the room. Interior images are not installation diagrams.
Controls from your seat
The LED display and remote make settings accessible without repeatedly walking to the unit. Suitability for up to 25 m² depends on solar heat, ceiling height and exhaust installation.
Start with the window position
Plan the route outdoors and seal the window opening before choosing a position. Do not discharge hot air back into the same room or block the intake.
Getting started
Prepare the window and exhaust
Position the unit level, route the duct outdoors and seal the opening as instructed. Avoid sharp bends and keep the grilles clear.
Select cooling
Set the desired temperature and check the cooled airflow direction. Sunlight, warm surfaces and incoming outdoor air affect how quickly the room cools.
Check condensate
Watch the indicators and drain water when required by the manual. Switch off before draining or moving the unit.
Your questions answered
Is 780 W the cooling capacity?
No. It is the electrical input of the WPAC-E07K, not the rate at which it removes heat from the room.
Can it cool without the exhaust duct?
Room cooling requires heat to leave the room. Without a correctly installed exhaust duct, hot air returns to the room.
PDF
Model manual · WPAC-E07K
Support
Manual and service
Model documentation and WetAir support.
WetAir.ua
Customer reviews
Retail partners
Where to find WetAir
These links open general WetAir retailer pages and do not confirm stock for this model.
Helpful WetAir guides
Practical guidance to help you use your appliance confidently and comfortably.
Related Products
