MWH4-50L
View review on VenconНедорогой компактный бойлер. 50 литров хватает для одного человека.
1 / 8
Product photo
5,199 UAH
Key specifications
- Power
- 1500 W
- Tank volume
- 50 l
- Heating element
- dry element
- ECO mode
- 55 °C
Model data
Verified specifications
- Power
- 1500 W
- Tank volume
- 50 l
- Heating element
- dry element
- ECO mode
- 55 °C
- Maximum temperature
- 75 °C
- Temperature presets
- 35 / 45 / 55 / 65 / 75 °C
- Protection rating
- IPX4
- Overheat protection
- yes
In detail
Product description
WetAir · MWH4-50L
50 litres with a dry heating element
MWH4-50L stores 50 litres of water and heats it with a 1500 W dry element. Five temperature presets give you a straightforward choice from 35 to 75 °C; ECO corresponds to 55 °C.
- Tank volume
- 50 l
- Power
- 1500 W
- Temperature presets
- 35 / 45 / 55 / 65 / 75 °C
- ECO mode
- 55 °C
- Maximum temperature
- 75 °C
How it works
From cold water to a stored hot supply
In MWH4-50L, water heats in a 50-litre tank, ready to be drawn through the connected water system.
The tank fills
Cold water enters the storage tank. The tank must be completely full before the first electrical switch-on.
The element transfers heat
The dry element transfers heat to the water through a protective enclosure, without direct contact between the heater and the water.
The temperature is maintained
The controls call for heat to maintain the selected temperature. As hot water is drawn off, cold water enters the tank and the heating cycle repeats.
The resultStorage separates heating from the moment of use: a hot-water supply is prepared first, then drawn off.
Simplified diagram: the dry element transfers heat through a protective well; the element itself does not contact the water.
Capacity for your use
The 50-litre tank gives you a stored hot-water supply without moving up to the series’ 80-litre version. Match capacity to your use: once the stored supply is drawn off, the water needs time to reheat.
Temperature on the panel
The five settings are 35, 45, 55, 65 and 75 °C. ECO maintains 55 °C; choose the temperature for your usual hot-water use.
Access for maintenance
Leave space around the connections for inspection and service. Overheat protection and the IPX4 rating complement the design; they do not remove the need for correct installation.
First start and everyday use
Arrange professional connection
Have installation and electrical and water connections carried out according to the manual. Leave access to the panel and service connections.
Fill before heating
Never energise an empty tank. Once it has been filled correctly, select a temperature and allow it to heat.
Check the water before contact
Hot water can scald. Mix it carefully with cold water at the tap and check the temperature before use.
Your questions answered
What temperature does ECO use?
55 °C. This model’s maximum setting is 75 °C.
Does it work like an instantaneous water heater?
No. This is a 50-litre storage model; reheating takes time after the hot-water supply has been used.
PDF
Model manual · MWH4-50L
Support
Manual and service
Model documentation and WetAir support.
WetAir.ua
Customer reviews
Retailer reviews
What customers say about this model
Short positive excerpts about this exact model with direct links to public sources.
MWH4-50L
Retail partners
Where to find WetAir
These links open general WetAir retailer pages and do not confirm stock for this model.
Related Products
MWH4-50L5,199 UAH