WetAir MWH1-50L
Hot water for your daily routine
This model has a 50-litre tank and a power rating of 1500 W for everyday water heating.
- Capacity
- 50 L
- Power
- 1500 W
Digital control
Set the temperature precisely
Adjust the temperature in 1 °C steps. The selected setting is saved after 5 seconds.
- 1 °C
- 5 s
- ECO 55 °C
- ECO corresponds to 55 °C.
- 75 °C is the maximum setting.
- Red indicates active heating; green indicates that the set temperature has been reached.
Dimensions
Check the space before installation
Compare the model’s width, depth and height with the prepared installation space.
- Width
- 385 mm
- Depth
- 385 mm
- Height
- 715 mm
Before connection
Installation requires a qualified professional
Have a qualified professional install and connect the appliance in line with the manual.
Daily use
ECO mode, volume and care
The 50 l tank suits one or two users and a kitchen: showers in a row without waiting, and a full heat-up from cold takes less time than on the 80 l models at the same 1500 W.
For a daily shower use ECO — the heater holds 55 °C, spends less energy keeping the temperature and builds up less scale than at the 75 °C maximum. Set an exact value in 1 °C steps only when you need hotter water.
- The wet element heats the water directly and the magnesium anode protects the tank from corrosion — have it checked during scheduled servicing.
- Never switch the unit on without water in the tank and do not alter the factory safety components.
- During a long absence switch the heater to ECO or turn it off.
How to choose the volume and controls — in the storage water heater guide.
Documentation
Keep the manual to hand
Download the manual before installation and keep it for future reference.
MWH1-50L
