WetAir MWH4-80L
80 litres with five temperature settings
This model has an 80-litre tank, a power rating of 1500 W and five fixed temperature settings.
- Capacity
- 80 L
- Power
- 1500 W
Five values
Choose the temperature you need
Choose from five temperature values: 35 °C, 45 °C, 55 °C, 65 °C or 75 °C.
- 35 °C
- 45 °C
- 55 °C
- 65 °C
- 75 °C
- The ECO setting is 55 °C.
Dimensions
Check the model height
Check the available height first, then the width and depth of the installation space.
- Width
- 385 mm
- Depth
- 385 mm
- Height
- 1030 mm
Prepare the space
Installation requires a qualified professional
A qualified professional must complete installation and connection in line with the manual.
Daily use
ECO mode, volume and care
The 80 l tank suits a family of three or four or filling a bath: more hot water in a row, while a full heat-up from cold takes longer than on the 50 l models at the same 1500 W.
For a daily shower choose the 55 °C setting — that is ECO mode: less energy spent holding the temperature and less scale than at 75 °C. Use the higher 65 and 75 °C settings when you need a reserve of hot water for a bath.
- The wet element heats the water directly and the magnesium anode protects the tank from corrosion — have it checked during scheduled servicing.
- Never switch the unit on without water in the tank and do not alter the factory safety components.
- During a long absence switch the heater to ECO or turn it off.
How to choose the volume and controls — in the storage water heater guide.
Documentation
Keep the manual to hand
Use the manual when planning the work, during installation and afterwards.
