Fruit leather tray set WetAir WFDA-K1003NSS
WFDA-K1003NSS
WetAir · WFDA-K34CBS
WFDA-K34CBS is a silicone mould with four rectangular cavities. Portion a fruit-and-nut mixture or fruit-leather purée into them, then flex the walls after cooling to release the finished bars.

How it works
WFDA-K34CBS supports the food’s shape during drying; the dehydrator itself provides heat and airflow.
Four rectangular cavities hold the mixture in separate portions. Spread it evenly within each cavity.
Warm air passes over the exposed mixture and carries away moisture. Even thickness helps avoid a wet centre and over-dried edges.
After cooling, gently flex the walls and remove the bars without a metal blade.
The resultThe mould or sheet supports the food until release; correct temperature and a doneness check still matter.
Rectangular cavities shape the bars without cutting a large sheet. Fill them with similar amounts and avoid a thick mound in the middle to keep drying times closer.
Let the portions cool, then flex the silicone away from the edges. Do not cut food inside the mould or pry it out with sharp metal.
Before ordering, send WetAir support the full dehydrator model from its rating label and the accessory code WFDA-K34CBS. Confirm that exact pairing rather than relying on similar-looking trays.
No. Remove the food and place it on a board first, so the knife cannot damage the surface.
Model documentation and WetAir support.
These links open general WetAir retailer pages and do not confirm stock for this model.