Convector heater WetAir WCH-200S
WCH-200S
- Power
- 2000 W
- Heat settings
- 750 / 1250 / 2000 W
- Net weight
- 2 kg
WetAir · WCH-1500AL
WCH-1500AL puts 750 or 1500 W of heat into a panel 66 cm wide and 12.4 cm deep. Positioned along a clear wall, it leaves room to live while natural convection gradually carries warmth into the space without a directed jet.

How it works
Natural convection moves the air: heated air rises and cooler air flows in to replace it.
Room air enters the lower part of WCH-1500AL. An unobstructed inlet keeps the air moving.
The heating element transfers heat to the air. The maximum power of WCH-1500AL is 1500 W.
Heated air rises out of the appliance and cooler air takes its place. This creates natural circulation without aiming a jet of air at yourself.
The resultAir circulates through the heating zone and carries warmth into the room.
The selector offers 750 / 1500 W. The thermostat cycles the heating on and off to maintain the selected temperature; the power level is selected separately.
A width of 66 cm and weight of 3.9 kg help you plan a place for WCH-1500AL. Allow for the supports as well as the body, with clear space for both the air inlet and outlet.
Choose a level, stable surface and fit the supports as instructed. Keep the cable away from hot surfaces and walking routes.
Select a mode and a comfortable temperature on the panel. Give the room time to warm before changing the settings again.
Keep the manual’s clearances from furniture and curtains. Do not cover the heater or dry clothes on it. Do not leave it unattended or running while you sleep.
No. Fabric obstructs airflow and creates an overheating risk. Keep the body and grilles uncovered.
The thermostat cycles the heating on and off to maintain the selected temperature; the power level is selected separately.
Model documentation and WetAir support.
These links open general WetAir retailer pages and do not confirm stock for this model.