Convector heater WetAir WCH-200S
WCH-200S
- Power
- 2000 W
- Heat settings
- 750 / 1250 / 2000 W
- Net weight
- 2 kg



Interior visualisations. Refer to product photos and the manual for the product’s appearance and included items.
The 66 cm-wide panel keeps a shallow profile and looks visually understated along the wall. WCH-1500AL is rated at 1500 W, a useful point of comparison; actual comfort still depends on insulation, ceiling height and placement.
The WCH-1500AL is a 1500 W convector, 66 cm wide and 12.4 cm deep, for discreet placement along a clear wall.
Consider the 1500 W rating alongside the insulation of the room, rather than assuming a universal room size. Choose a permanent, safe position first, where furniture, curtains and belongings cannot obstruct the body; then plan how it will fit into the daily routine.
The WCH-1500AL uses natural convection: cooler air enters below, passes through the heating zone and rises as a warm airflow. Keep both the lower inlet and upper outlet clear.
Before using the WCH-1500AL, inspect the cable, check the position of the body, and start with a moderate setting. Do not cover the appliance or use it as a clothes dryer.
The AL version gives a wide panel and an exact depth of 12.4 cm. The WCH-1500AL has confirmed specifications of 1500 W and a weight of 3.9 kg - clear reference points without inventing temperatures, room sizes or warm-up times.
Let the WCH-1500AL cool, then use a soft, dry cloth to remove dust from the body and accessible grilles. Keep the cable away from hot areas, protect the appliance from moisture and never cover or obstruct the air outlet.
Allow the side clearances specified in the manual in addition to the body width. The dimensions are 660 × 124 × 505 mm. Check not only the space for the body, but also the clearance around the air openings. The net weight is 3.9 kg.
| Dimensions | 660 × 124 × 505 mm |
|---|---|
| Net weight | 3.9 kg |
| Power | 1500 W |
| Type of heat | convection |
Before your first evening with the WCH-1500AL, open the detailed manual: check the acceptable installation method, distances, assembly of supports or mounts, and the first start-up procedure. That preparation helps the warmth settle into the room calmly and predictably.
Model documentation and WetAir support.
These links open general WetAir retailer pages and do not confirm stock for this model.