Fan heater WetAir WFH-30W
WFH-30W
- Power
- 1500 W
- Net weight
- 1.23 kg
- Heating element
- PTC ceramic
1 / 3
Product photo
699 UAH
Key specifications
- Power
- 2000 W
- Heat settings
- 1000 / 2000 W
- Coverage
- up to 25 m²
- Controls
- mechanical
Model data
Verified specifications
- Power
- 2000 W
- Heat settings
- 1000 / 2000 W
- Coverage
- up to 25 m²
- Controls
- mechanical
- Thermostat
- adjustable
- Fan-only mode
- yes
- Overheat protection
- yes
- Tip-over protection
- yes
- Net weight
- 1.2 kg
In detail
Product description
WetAir · WFH-28
A directed airflow at 1000 or 2000 W
WFH-28 is a 1.2 kg fan heater with 1000 and 2000 W settings. A mechanical thermostat helps maintain warmth, the fan also runs without heat, and overheat and tip-over protection complement correct placement.
- Power
- 2000 W
- Heat settings
- 1000 / 2000 W
- Net weight
- 1.2 kg
How it works
From room air to a warm airflow
In WFH-28, the fan carries heat from the element into the area in front of the appliance.
The fan draws in air
Room air enters through the intake openings and reaches the fan.
The airflow warms
The heating element transfers heat to the air. The maximum heating power of WFH-28 is 2000 W.
Warm air flows forwards
Air exits through the front grille and carries warmth into the area ahead of the heater.
The resultWarmth is carried by moving air, so unobstructed grilles are essential to the whole process.
Choose the heat level
WFH-28 offers 1000 / 2000 W. The lower setting uses less heating power and the higher setting uses full power; choose for the warmth needed where you are using it.
Airflow without heat
The fan can run without heating. It moves room air rather than refrigerating it, so this mode does not cool the air below room temperature.
Carry it after cooling
WFH-28 weighs 1.2 kg. Switch off, unplug and let it cool before carrying it, then check its stability again in the new position.
Set up for comfortable warmth
Position securely
Choose a level, stable surface and fit the supports as instructed. Keep the cable away from hot surfaces and walking routes.
Choose the settings
Select the required mode on the panel. Direct warmth into a clear area; do not place the heater right against a person or furniture.
Keep the heat unobstructed
Keep the manual’s clearances from furniture and curtains. Do not cover the heater or dry clothes on it. Do not leave it unattended or running while you sleep.
Your questions answered
Why must the grille stay clear?
The fan needs a clear inlet and outlet. A blocked grille reduces airflow over the heater and can cause overheating.
Does the thermostat change the heater’s power?
The thermostat cycles the heating on and off to maintain the selected temperature; the power level is selected separately.
Support
Manual and service
Model documentation and WetAir support.
WetAir.ua
Customer reviews
Retail partners
Where to find WetAir
These links open general WetAir retailer pages and do not confirm stock for this model.
Related Products
WFH-28699 UAH