Fan heater WetAir WFH-28
WFH-28
- Power
- 2000 W
- Heat settings
- 1000 / 2000 W
- Coverage
- up to 25 m²
1 / 4
Product photo
1,399 UAH
Key specifications
- Power
- 1500 W
- Net weight
- 1.23 kg
- Heating element
- PTC ceramic
- Heat settings
- 750 / 1500 W
Model data
Verified specifications
- Power
- 1500 W
- Net weight
- 1.23 kg
- Heating element
- PTC ceramic
- Heat settings
- 750 / 1500 W
- Thermostat
- adjustable
- Tip-over protection
- yes
- Overheat protection
- yes
- Oscillation
- yes
In detail
Product description
WetAir · WFH-30W
Ceramic warmth with oscillation
WFH-30W warms the air with a ceramic PTC element at 750 or 1500 W. Oscillation changes the airflow direction, while the thermostat controls heating after you select a comfortable temperature.
- Power
- 1500 W
- Heat settings
- 750 / 1500 W
- Net weight
- 1.23 kg
Product film
WFH-30W in a home interior
A white body with a round front grille and controls on top. A visual explanation of warm airflow.
How it works
From room air to a warm airflow
In WFH-30W, the fan carries heat from the element into the area in front of the appliance.
The fan draws in air
Room air enters through the intake openings and reaches the fan.
The airflow warms
The ceramic PTC element transfers heat to the air. The maximum heating power of WFH-30W is 1500 W.
Warm air flows forwards
Air exits through the front grille and carries warmth into the area ahead of the heater.
The resultWarmth is carried by moving air, so unobstructed grilles are essential to the whole process.
Choose the heat level
WFH-30W offers 750 / 1500 W. The lower setting uses less heating power and the higher setting uses full power; choose for the warmth needed where you are using it.
Oscillation changes the airflow direction
Switch on oscillation to sweep the warm airflow across a wider area in front of the heater. Do not force the body to turn, and leave room for its movement.
Carry it after cooling
WFH-30W weighs 1.23 kg. Switch off, unplug and let it cool before carrying it, then check its stability again in the new position.
Set up for comfortable warmth
Position securely
Choose a level, stable surface and fit the supports as instructed. Keep the cable away from hot surfaces and walking routes.
Choose the settings
Select the required mode on the panel. Direct warmth into a clear area; do not place the heater right against a person or furniture.
Keep the heat unobstructed
Keep the manual’s clearances from furniture and curtains. Do not cover the heater or dry clothes on it. Do not leave it unattended or running while you sleep.
Your questions answered
Why must the grille stay clear?
The fan needs a clear inlet and outlet. A blocked grille reduces airflow over the heater and can cause overheating.
Does the thermostat change the heater’s power?
The thermostat cycles the heating on and off to maintain the selected temperature; the power level is selected separately.
Support
Manual and service
Model documentation and WetAir support.
WetAir.ua
Customer reviews
Retail partners
Where to find WetAir
These links open general WetAir retailer pages and do not confirm stock for this model.
Related Products
WFH-30W1,399 UAH