Air purifier WetAir WAP-35
WAP-35
- Coverage
- up to 35 m²
- Speeds
- 4 speeds + AUTO
- Timer
- 1–12 h
1 / 9
Product photo
8,999 UAH
Key specifications
- Coverage
- up to 80 m²
- Filter
- combined: pre-filter, activated carbon, HEPA H13
- PM2.5 sensor
- yes
- Speeds
- 4 levels + Turbo, AUTO mode
Model data
Verified specifications
- Coverage
- up to 80 m²
- Filter
- combined: pre-filter, activated carbon, HEPA H13
- PM2.5 sensor
- yes
- Speeds
- 4 levels + Turbo, AUTO mode
- Timer
- 1–24 h
- Night mode
- yes
- App control
- yes
- Auto-off when cover removed
- yes
In detail
Product description
WetAir · WAP-50
HEPA H13 with PM2.5 sensing and app control
WetAir WAP-50 has a combined filter with HEPA H13, a PM2.5 sensor and app control. Four levels, Turbo and AUTO give you a choice of operating intensity, with suggested coverage up to 80 m².
- Suggested room size
- up to 80 m²
- Performance depends on room conditions.
- Filtration
- Pre-filter + carbon + HEPA H13
- Sensor
- PM2.5
- Timer
- 1–24 h
- Speeds
- 4 + Turbo + AUTO
How it works
Room air passes through the filter and returns
The purifier treats air already in the room; it does not supply fresh outdoor air.
The fan draws air in
Room air enters through the intake. Furniture and curtains must not block this path.
The filter captures pollutants
In the WAP-50, the pre-filter catches larger debris, HEPA H13 captures fine particles and carbon helps reduce some odours.
Air circulates again
The PM2.5 sensor monitors fine particles, with four levels, Turbo and AUTO available to control circulation.
The resultRegular circulation through a serviceable filter helps reduce airborne particles, but does not replace ventilation and cleaning.
PM2.5 is a particle reading
PM2.5 refers to fine airborne particles up to 2.5 micrometres in diameter. The reading helps track changes in the air, but does not measure CO₂, every odour or every pollutant.
From Turbo to night mode
Choose a manual level, Turbo or AUTO for the situation. App control and the 1–24 hour timer make settings accessible, with night mode for evening use; opening the cover stops operation.
Getting started
Prepare the filter
Before first use, check that any filter packaging has been removed, fit the filter as instructed and close the cover. Keep the intake and outlet clear.
Choose operation for the room
The PM2.5 sensor monitors fine particles, with four levels, Turbo and AUTO available to control circulation.
Your questions answered
Does the sensor show CO₂ levels?
No. The WAP-50 sensor measures PM2.5 fine particles. A low PM2.5 reading does not mean ventilation is unnecessary.
Do I still need to ventilate?
Yes. The purifier filters room air but does not bring in fresh air or remove CO₂.
PDF
Model manual · WAP-50
Support
Manual and service
Model documentation and WetAir support.
WetAir.ua
Customer reviews
Retail partners
Where to find WetAir
These links open general WetAir retailer pages and do not confirm stock for this model.
Helpful WetAir guides
Practical guidance to help you use your appliance confidently and comfortably.
Related Products
WAP-508,999 UAH