Air purifier WetAir WAP-50
WAP-50
- Coverage
- up to 80 m²
- Filter
- combined: pre-filter, activated carbon, HEPA H13
- PM2.5 sensor
- yes
WetAir · WAP-35
WetAir WAP-35 combines HEPA filtration with four speeds and AUTO mode. Suggested coverage is up to 35 m², and a 1–12 hour timer lets you choose the length of a session.

How it works
The purifier treats air already in the room; it does not supply fresh outdoor air.
Room air enters through the intake. Furniture and curtains must not block this path.
The WAP-35 HEPA filter captures fine airborne particles as air passes through its fibres.
Four speeds let you set WAP-35 circulation manually, with AUTO available for automatic operation.
The resultRegular circulation through a serviceable filter helps reduce airborne particles, but does not replace ventilation and cleaning.
Choose one of four speeds, AUTO or sleep mode. The 1–12 hour timer is useful when you want operation to finish after a set interval.
HEPA captures airborne particles as air passes through the filter. It does not remove settled dust from shelves or, by itself, remove gases; ventilation and cleaning are still needed.
Before first use, check that any filter packaging has been removed, fit the filter as instructed and close the cover. Keep the intake and outlet clear.
Four speeds let you set WAP-35 circulation manually, with AUTO available for automatic operation.
Yes. AUTO is available alongside four speeds, with sleep mode and a 1–12 hour timer.
Yes. The purifier filters room air but does not bring in fresh air or remove CO₂.
Model documentation and WetAir support.
These links open general WetAir retailer pages and do not confirm stock for this model.
Practical guidance to help you use your appliance confidently and comfortably.