Convector heater WetAir WCH-200S
WCH-200S
- Power
- 2000 W
- Heat settings
- 750 / 1250 / 2000 W
- Net weight
- 2 kg



Interior visualisations. Refer to product photos and the manual for the product’s appearance and included items.
The wide AL body distributes 2000 W along its 82 cm-long panel. The WCH-2000AL is rated at 2000 W, a useful point of comparison; actual comfort still depends on insulation, ceiling height and placement.
The WCH-2000AL extends the panel to 82 cm and the power to 2000 W — for a room with a longer clear wall and a need for more warmth.
Before choosing 2000 W, evaluate the insulation and the available 82 cm width without furniture in front of the appliance. Choose a permanent, safe position first, where furniture, curtains and belongings cannot obstruct the body; then plan how it will fit into the daily routine.
The WCH-2000AL uses natural convection: cooler air enters below, passes through the heating zone and rises as a warm airflow. Keep both the lower inlet and upper outlet clear.
Before using the WCH-2000AL, inspect the cable, check the position of the body, and start with a moderate setting. Do not cover the appliance or use it as a clothes dryer.
The 2000 W AL version is distinguished by its longer body and a weight of 4.9 kg. For the WCH-2000AL, 2000 W and a weight of 4.9 kg are confirmed specifications - clear reference points without inventing temperatures, room sizes or warm-up times.
Let the WCH-2000AL cool, then use a soft, dry cloth to remove dust from the body and accessible grilles. Keep the cable away from hot areas, protect the appliance from moisture and never cover or obstruct the air outlet.
This panel needs more horizontal space than the 1500 W version. The dimensions are 820 × 124 × 505 mm. Check not only the space for the body, but also the clearance around the air openings. The net weight is 4.9 kg.
| Dimensions | 820 × 124 × 505 mm |
|---|---|
| Net weight | 4.9 kg |
| Power | 2000 W |
| Type of heat | convection |
Before your first evening with the WCH-2000AL, open the detailed manual: check the acceptable installation method, distances, assembly of supports or mounts, and first-time start-up procedure. That preparation helps the warmth settle into the room calmly and predictably.
Model documentation and WetAir support.
These links open general WetAir retailer pages and do not confirm stock for this model.